Garage Door Torsion Springs

Garage doors are designed with two types of springs. One is torsion spring and the other is extension spring. Torsion springs are used to counterbalance the weight of the garage door because they are mounted at the top of the garage door‘s opening.

Discover Garaga's different garage door styles

It is adjusted and secured using a metal shaft which usually passes through the middle of torsion springs. This device is built according to the mechanism, type, and design of the garage door. These springs are responsible to lift the weight of the garage door while opening. They support the entire system during the opening and closing operations. Whenever you have problems with the garage door springs, you should call a professional garage door repair experts such as, Dallas garage door repair company to restore the functionality of garage door.

Shaker-Flat XL / Shaker-Flat Long design from Garaga Garage Doors

If you experience it really hard to operate the garage door, then there are chances that operating system of the garage door has some troubles. Instead of handling it on your own, you should call a professional garage door technician who could do these repairs easily. DIY garage door work can be very risky especially if the job is involved in the torsion springs. Since garage door springs are used to keep its structure functional by storing its tension in the long run. They have very complicated characteristics to store the pressure and forces inside the mechanism of garage door which is better understood by the garage door professionals therefore, you should leave this risky task to the pros.

Garage And Roll-up Doors — The Top Things To Know | by Jennifer ...

You could perform some earlier check-ups like, cleaning the accumulating grease from tracks, panels, and rollers. It could be caused to the problems for the operating system of the garage door. You could also check the mounting brackets to find out the loose screws, nuts, and bolts. If they are, you should tighten them to make them secure. Minor garage door problems can be fixed on your own but when it comes to readjusting or replacing the critical part like torsion springs, it should be done by those experts who really know the rules and characteristics of the garage door spring system.

But if you want to try garage door spring project by yourself, here are some important points which you should keep in mind while handling the malfunctioning and damaged garage door springs. Remember, garage door torsion springs can be a very dangerous and risky component of your garage door. 

Before starting a project, you should make sure that you have bought the correct one. There are multiple types of garage door springs with similar features available in the market. You need to make sure that you have the right one according to their specification. You must release the tension from the old spring before removing it safely. Don’t touch the cable drums while replacing the springs.

Easy Autogates

Afterward, insert a well-fitting bar into the winding cones before releasing or removing anything. Don’t forget to place the bar inside the cone while doing DIY garage door spring replacement work. Avoid touching the brackets where springs are wounds. If you are not sure about the concerns of the garage door, make sure you contact your local garage door repair company to handle the damaged garage door springs.

Getting professional garage door services could be one call away so don’t make the situation worse and don’t hesitate to ask for help about this matter. Hire them and don’t put yourself and your loves one into danger just to save some penny.